Home » AEROFIXX Kit
Pro Clima

AEROFIXX Kit

FREEZE WARNING:

AEROFIXX Kit cannot be transported through low temperatures because it will freeze. Liquid-applied products cannot be returned. If you believe your order may need to be transported through freezing temperatures, please delay purchase and contact your local 475 representative .
$637.80
Kit Option
Color
KIT OPTIONS
Kit Components Available Colors :
Price
AEROFIXX Application Tool with 1 box of VISCONN (12 sausages), 1 box of VISCONN FIBRE (12 sausages) & 1 VISCONN Depth Gauge Blue (Dries Black) / White :
$637.80 / $646.20
AEROFIXX Application Tool with 2 boxes of VISCONN (24 sausages), 3 boxes of VISCONN FIBRE (36 sausages) & 1 VISCONN Depth Gauge Blue (Dries Black) / White :
$1,155.20 / $1,171.85

Applications

Spray and seal application tool for use with VISCONN® and VISCONN FIBRE® sausages. Connects with standard compressors to quickly and easily apply liquid applied airtight membrane anywhere from wall or ceiling surfaces to hard-to-reach gaps.

Kit Options, each available in blue (dries black) or white

  • AEROFIXX® Application Tool with 1 box of VISCONN (12 sausages), 1 box of VISCONN FIBRE (12 sausages) & 1 VISCONN Depth Gauge

  • AEROFIXX®Application Tool with 2 boxes of VISCONN (24 sausages), 3 boxes of VISCONN FIBRE (36 sausages) & 1 VISCONN Depth Gauge

Advantages

  • Time-saving airsealing of difficult junctions
  • None of the clean up required from typical airless sprayer application
  • Apply VISCONN PHI-Certified airbarrier - for interior with vapor-variable properties
  • Reliably cover cracks and joints of up to3/4" (20 mm) with VISCONN FIBRE
  • Application and spreading of the material in one step
  • 2 Precise application settings: 1 for a line of material to close joints; 2 to spray over and seal surfaces evenly
  • Allows the for one-handed application with no brush required
  • VISCONN available in two color options: one that is blue when wet and dries black to confirm drying, one that is white when both wet or dry

Properties

  • Pressure: up to 100 psi (6.8 bar)
  • Lightweight and compact form

Substrates

  • Apply to walls, ceilings and floor surfaces, such as masonry, CMU, wood sheathing, fiberboard, joists or joist bays
  • Highly porous/uneven materials require 2 or more coats for reliable coverage/airsealing
  • It may be necessary to apply more than one coat in the case of uneven or rough subsurfaces
  • Can be plastered/painted over, Pro Clima adhesive tapes can be bonded onto it (and can be sprayed over all TESCON/CONTEGA Pro Clima tapes)

Use and Care:

  • Default pressure: open blue knob fully and turn back 1/2 rotation. Set compressor to 90-110 psi (max 145 psi)
  • Please clean out AEROFIXX after use with warm water to remove any VISCONN from tool. Use mineral spirits if VISCONN has dried
  • To lubricate tool before use, please use faucet grease or other lubricant safe for rubber - to make tool operation easier.