Lamilux FE

Product Specifications

Applications

High performance triple pane skylight with a thermal bridge free frame. For use on flat roofs.

Stock Dimensions

29 ³/₁₆" x 29 ³/₁₆" (742 mm x 742 mm) - 113 lbs
29 ³/₁₆"x 41" (742 mm x 1042 mm) - 139 lbs
33 ¹/₈" x 52 ¹³/₁₆" (842 mm x 1342 mm)
21 ⁵/₁₆" x 46 ¹⁵/₁₆" (541 mm x 1191 mm)

Advantages

• Specific flat roof design: integrated drip edge, curb and airtightness
• “Structural Glazing” allows for a totally flush glass to frame transition that provides the FE with self-cleaning properties and allows uninterrupted water run-off
• The aluminum frame is fully insulated to mitigate thermal bridges and condensation at the interior
• Triple pane glass and airtight construction also minimizes sound transmission from the exterior
• Completely pre-assembled skylight solution mounted on an insulated curb for plug-and-play installation on any roof below 6:12 pitch
• The FE is available in custom sizes, up to 10' in length with a variety of accessories, including manual and motorized ventilation with options for concealed hardware; reflective interior curbs; and interior and exterior shading.
• Customizable through alternate glazing options and curb heights, and powder coating of skylight frames in color of your choice

Properties

• Can be installed in roof pitches as low as 3°, >5° recommended to keep glass clean. Max roof pitch 25° (6:12 pitch)
• Uglass: 0.6 W/m2K (0.105 BTU/hr.ft2.°F ) per EN 673
• Upstand of 7 7/8" (200 mm) insulated with 2 3/8" (60 mm) PU foam (0.023 W/mK)
• SHGC: 0.32 (as high as 0.49 or as low as 0.20 by special order)
• Visual Transmittance: 0.60 (varies for alternate SHGCs)
• Snow load: 28 psf (1.34 kn/m2)
• The Lamilux FE has been tested in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-17 and CSA A440S1-17, and meets all the performance requirements therein.
• For stock units: Unit fixed with one white Z-clip on interior of curb