September 28, 2015

475 Presentation: Make It Tight – Building Enclosure Airtightness Training

CO Rockies PHIn this four hour comprehensive introduction to building airtightness and air sealing, attendees will gain detailed knowledge about:

  1. Why an air barrier is critical to high-performance construction – with an in-depth discussion of the supporting building science.  From energy efficiency to health to prevention of moisture damage, the essential importance of airtightness is one of the best kept secrets in construction today and this session will unravel the myths and provide clear explanations.
  2. What is an air barrier and what are air barrier standards today – including a comprehensive look at the materials and components used in making air barriers.  From sheathing, to membranes, caulking, tapes and gaskets, there is a growing array of products to choose from and we’ll discuss them all and how they can help hit the airtightness numbers you need and keep it that way.
  3. How to design an air barrier – uncovering the complete process and critical decisions needed to optimize chances for success.  Should the air barrier be outboard or inboard; how are the walls connected to the roof; what design decisions will make airtightness easier to achieve or harder.  How do the materials and components go together and how to describe it in a way that helps the contractor make the airtight system a reality on site.
  4. How to construct and test an air barrier – describing implementation of design with real world examples of both new build and retrofit construction.   We’ll see what is working well and what is not for different construction types.   Then look at the tools and methods for testing airtightness and delivering quality assurance.

The course is approved for professional continuing education credits:
– 4 AIA  LU|HSW credits| 2 BPI CEU

Tweet about this on TwitterShare on FacebookShare on LinkedInPin on PinterestEmail to someone

2 Responses to 475 Presentation: Make It Tight – Building Enclosure Airtightness Training

  1. Lanny October 18, 2017 at 1:36 pm #

    Is this course, building enclosure training, being offered again?

    • John October 18, 2017 at 2:13 pm #

      Hi Lanny,

      We do continue to offer it. We publicize each presentation separately. Where are you located? We might be in your area soon. And if we are not, it may be possible to set up a training. At minimum, we can assist you in getting any of your questions answered.

Leave a Reply